Rain hose irrigation (100% better durable polythene)

Description

Rain hose irrigation systems are a new way of watering crops under moderate pressure. Each pipe is 100M long . The pipe is sequentially perforated at determined intervals using nanotechnology to create tiny holes from which water is poured to irrigate the crops.

The diameter of the pipe ranges from 32mm to 50mm. A farmer chooses the preferred size based on crop water requirement and the amount of land being irrigated. For instance, a farmer with 1 acre of the crop will water with the volume delivered through a 32mm rain hose pipe. Another farmer with 5 acres of land will need to irrigate with a 50mm rain hose pipe. An acre of crop uses 800 meters of 32mm rain hose pipes, 600M of 40mm pipes, and 400M of 50mm pipes.

This 100 Meter flat irrigation hose were also named as rain tape, rain pipe, spray tube, rain hose, perforated tube.

This system is especially useful for field irrigation of crops and plants which need water in short time in dry farmland. The service life of sprinkler hose is around 2 to 5 years depends on how it is used and maintained by the user.

If you need to irrigate for a longer distance, or you use it under higher pressure, then you need a thicker one.   hortitechno rain hose has  thickness ranging between 0.2 mm~0.425 mm, working pressure ranges from 0.5 bar to 1.2 bar. And it is better keep it

If the water is clean enough, there is not need to use filter. If the water is bit of turbid, you just need to open the end clip once in a while and let the sand flush out to prevent the pipe from clogging. This Single Sprinkler Hose can be used as the rain hose too in shorter lengths, once pressure is very low.